SS304 Water Treatment Softener System Deionized ISO Wall Mounted

1. The automatic sodium ion exchanger uses the principle of ion exchange to remove scaling ions such as calcium and magnesium in water. When the hardness ions contained in the raw water are exchanged through the resin layer, the calcium and magnesium ions in the water and the sodium ions adsorbed by the resin are replaced, and the calcium, magnesium and sodium ions adsorbed by the resin enter the water, so what is exchanged from the water is the removal of softened water. hardness.

2. Since the hardness of water is mainly formed and represented by calcium and magnesium, cation exchange resins (water softeners) are usually used to replace Ca2+ and Mg2+ in water (the main components of scaling). With the increase of Ca2+ and Mg2+ content in resin, the removal efficiency of Ca2+ and Mg2+ in resin decreased gradually.

3. When the resin absorbs a certain amount of calcium and magnesium ions, it must be regenerated. The regeneration process is to wash the resin layer with brine in a salt tank and replace the hardness ions on the resin. As the regeneration waste is drained from the tank, the resin resumes its softening and exchange functions.

4. Because the hardness of water is mainly formed by calcium and magnesium, and it is said that the hardness of water is formed by calcium and manganese, and the principle of sodium ion exchange softening treatment is to pass raw water through sodium cation exchange resin, so that calcium, Magnesium hardness exchanges the phase with the sodium ion of the resin, thereby adsorbing Ca2+, Mg2+, in the water, so that the water is softened.

• 1. What's the delivery time? We will deliver the product in 7 days after receiving the deposit.
• 2. What's your payment terms? We can accept various payment terms if it is convenient for you.
• 3. what's your MAQ? Our MAQ is 1 piece.
• 4. What's the lifetime of the wearing parts? The material of our product is of high quality, and the lifetime of our wearing parts is twice longer than the others,including the roller skin, die and bearing.
• 5. What is your warranty? 12 months except the spare parts.
• 6. Will you send engineers to install the plant? Of course yes,but at an extra cost will be paid by customers. Or you can get local contractors to do the commissioning and we send one supervising engineer.
• 7. Do you have some foreign customers using your equipments? Yes , we have customers all over the world