FRP 750LPH Reverse Osmosis Water Filtration System For Home

Reverse osmosis water treatment is a kind of with the aid of choice through (through) the skill of membrane will return to pressure as the driving force for a membrane separation technology, when system and the pressure is greater than in the aqueous solution of osmotic pressure, the water molecules through the membrane unceasingly, after producing water flows into the central tube, and then out in the end the impurities in the water, such as ion, organic matters, such as bacteria, viruses, interception on the inlet side of the membrane, and then in the thick water outflow water end, so as to achieve separation and purification.

The operating pressure is applied on the inlet (concentrated solution) side to overcome the natural osmotic pressure. When the operating pressure higher than the natural osmotic pressure is removed from the concentrated solution side, the flow direction of the natural osmotic water molecules will be reversed. The water in the inlet (concentrated solution) will pass through the reverse osmosis membrane to become the purification water produced on the dilute solution side.Reverse osmosis equipment can stop all the soluble salt and organic molecular weight greater than 100, but allowing water molecules through the reverse osmosis composite membrane desalting rate is generally greater than 98%, they are widely used in industrial pure water preparation and electronic ultrapure water, drinking pure water production, such as boiler feed water process, using reverse osmosis equipment before ion exchange can sharply decreasing operation of water and wastewater emissions.

The RO system consists of raw water pretreatment , RO unit and post-treatment. Due to the wide variety of raw waters and the complexity of the ingredients, it is necessary to select a suitable pretreatment process to reduce scale and scale and prevent the performance of the RO membrane from deteriorating. Especially in the field of reclaimed water and wastewater reuse, the selection of a suitable pretreatment system will directly affect the stability of the entire water treatment system.

Therefore, the raw water must be strictly pretreated. According to different water quality requirements, choose the appropriate after treatment system to meet the final requirements of aquatic products. If there are high requirements for microorganisms, we can choose a combination of ozone and UV disinfection technology. Thanks to the RO process, we can make the system more stable, lower energy consumption and water quality guarantee.